XFM MODEL 0 Item Selected
Image
Model
Product Name
Price
Available
Quantity
[XFM] Mass Flow Meters
XFM
Rp.36.635.900
1 Availability
  XFM MAX FLOW (N2) 0 Item Selected
  XFM MATERIAL 0 Item Selected
  XFM SEAL 0 Item Selected
  XFM FITTING 0 Item Selected
  XFM DISPLAY 0 Item Selected
  XFM POWER 0 Item Selected
  XFM OUTPUT SIGNAL 0 Item Selected
  XFM DIGITAL INTERFACE 0 Item Selected
  XFM FLOW RANGE 0 Item Selected
  XFM GAS 0 Item Selected
  XFM INLET PRESSURE 0 Item Selected
×
Multiple Product

have been added to your cart

There Are items in your cart.

Cart Subtotal: $xxx.xx

Go to checkout
  • Aalborg XFM47 Mass Flow Meter, 3/8" Tube OD, 100 L/min

Aalborg XFM47 Mass Flow Meter, 3/8" Tube OD, 100 L/min

Not yet rated Write a review

Available Options

Rp.36.635.900
Availability:
4 - 6 WEEKS
Product Code:
XFM47
Brand:
Aalborg
  • Free delivery

  • Money back guarantee

Share

The Aalborg XFM mass flow meter is designed to work with clean gases. The meters are available in aluminum or stainless steel models. Flow rates can be displayed in 23 different volumetric flow or mass flow engineering units including user specific units.

The Aalborg XFM flow meter supports many functions including: a programmable flow totalizer, high and low flow alarm, automatic zero adjustment, 2 relay outputs, jumper selectable 0-5 VDC or 4-20 mA analog outputs, and status LED diagnostics. The XFM also stores calibration information for up to 10 different gases and supports internal or user-specific k-factors.The Aalborg XFM digital mass flow meter is available with a digital RS485 or RS-232 interface (an optional Profibus DP interface is also available) which provides access to applicable internal data including: flow, CPU temperature, auto zero, totalizer and alarm settings, gas table, conversion factors and engineering units selection, dynamic response compensation and linearization table adjustment. The analog interface provides 0 to 5 VDC or 40 to 20 mA (jumper selectable) outputs for flow reading.The Aalborg XFM supports automatic sensor zero offset adjustment which can be activated locally or remotely via digital interface. The totalizer function calculates the total volume of gas by integrating the actual gas flow rate as a function of time. High and low gas flow alarm limits can be preprogrammed via digital interface. Alarm conditions become true when the current flow reading is equal or higher/lower than corresponding values of high and low alarm levels.

Please note that XFM mass flow meters are designed to work only with clean gases. Never try to measure flow rates of liquids with XFM. Calibrations are performed at standard conditions [14.7PSIA (101.4kPa) and 70°F (21.1°C)] unless otherwise requested.

Write a review